Load requirements from Codex Backend. It only does this for enterprise
customers signed in with ChatGPT.
Todo in follow-up PRs:
* Add to app-server and exec too
* Switch from fail-open to fail-closed on failure
This PR adds support for chained (layered) config.toml file merging for
clients that use the app server interface. This feature already exists
for the TUI, but it does not work for GUI clients.
It does the following:
* Changes code paths for new thread, resume thread, and fork thread to
use the effective config based on the cwd.
* Updates the `config/read` API to accept an optional `cwd` parameter.
If specified, the API returns the effective config based on that cwd
path. Also optionally includes all layers including project config
files. If cwd is not specified, the API falls back on its older behavior
where it considers only the global (non-project) config files when
computing the effective config.
The changes in codex_message_processor.rs look deceptively large. They
mostly just involve moving existing blocks of code to a later point in
some functions so it can use the cwd to calculate the config.
This PR builds upon #9509 and should be reviewed and merged after that
PR.
Tested:
* Verified change with (dependent, as-yet-uncommitted) changes to IDE
Extension and confirmed correct behavior
The full fix requires additional changes in the IDE Extension code base,
but they depend on this PR.
We already support reading from `config.toml` through a symlink, but the
code was not properly handling updates to a symlinked config file. This
PR generalizes safe symlink-chain resolution and atomic writes into
path_utils, updating all config write paths to use the shared logic
(including set_default_oss_provider, which previously didn't use the
common path), and adds tests for symlink chains and cycles.
This resolves#6646.
Notes:
* Symlink cycles or resolution failures replace the top-level symlink
with a real file.
* Shared config write path now handles symlinks consistently across
edits, defaults, and empty-user-layer creation.
This PR was inspired by https://github.com/openai/codex/pull/9437, which
was contributed by @ryoppippi
Load managed requirements from MDM key `requirements_toml_base64`.
Tested on my Mac (using `defaults` to set the preference, though this
would be set by MDM in production):
```
➜ codex git:(gt/mdm-requirements) defaults read com.openai.codex requirements_toml_base64 | base64 -d
allowed_approval_policies = ["on-request"]
➜ codex git:(gt/mdm-requirements) just c --yolo
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.26s
Running `target/debug/codex --yolo`
Error loading configuration: value `Never` is not in the allowed set [OnRequest]
error: Recipe `codex` failed on line 11 with exit code 1
➜ codex git:(gt/mdm-requirements) defaults delete com.openai.codex requirements_toml_base64
➜ codex git:(gt/mdm-requirements) just c --yolo
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.24s
Running `target/debug/codex --yolo`
╭──────────────────────────────────────────────────────────╮
│ >_ OpenAI Codex (v0.0.0) │
│ │
│ model: codex-auto-balanced medium /model to change │
│ directory: ~/code/codex/codex-rs │
╰──────────────────────────────────────────────────────────╯
Tip: Start a fresh idea with /new; the previous session stays in history.
```
This adds logic to load `/etc/codex/config.toml` and associate it with
`ConfigLayerSource::System` on UNIX. I refactored the code so it shares
logic with the creation of the `ConfigLayerSource::User` layer.
- We now support `.codex/config.toml` in repo (from `cwd` up to the
first `.git` found, if any) as layers in `ConfigLayerStack`. A new
`ConfigLayerSource::Project` variant was added to support this.
- In doing this work, I realized that we were resolving relative paths
in `config.toml` after merging everything into one `toml::Value`, which
is wrong: paths should be relativized with respect to the folder
containing the `config.toml` that was deserialized. This PR introduces a
deserialize/re-serialize strategy to account for this in
`resolve_config_paths()`. (This is why `Serialize` is added to so many
types as part of this PR.)
- Added tests to verify this new behavior.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/8354).
* #8359
* __->__ #8354
`load_config_layers_state()` should load config from a
`.codex/config.toml` in any folder between the `cwd` for a thread and
the project root. Though in order to do that,
`load_config_layers_state()` needs to know what the `cwd` is, so this PR
does the work to thread the `cwd` through for existing callsites.
A notable exception is the `/config` endpoint in app server for which a
`cwd` is not guaranteed to be associated with the query, so the `cwd`
param is `Option<AbsolutePathBuf>` to account for this case.
The logic to make use of the `cwd` will be done in a follow-up PR.
This is a significant change to how layers of configuration are applied.
In particular, the `ConfigLayerStack` now has two important fields:
- `layers: Vec<ConfigLayerEntry>`
- `requirements: ConfigRequirements`
We merge `TomlValue`s across the layers, but they are subject to
`ConfigRequirements` before creating a `Config`.
How I would review this PR:
- start with `codex-rs/app-server-protocol/src/protocol/v2.rs` and note
the new variants added to the `ConfigLayerSource` enum:
`LegacyManagedConfigTomlFromFile` and `LegacyManagedConfigTomlFromMdm`
- note that `ConfigLayerSource` now has a `precedence()` method and
implements `PartialOrd`
- `codex-rs/core/src/config_loader/layer_io.rs` is responsible for
loading "admin" preferences from `/etc/codex/managed_config.toml` and
MDM. Because `/etc/codex/managed_config.toml` is now deprecated in favor
of `/etc/codex/requirements.toml` and `/etc/codex/config.toml`, we now
include some extra information on the `LoadedConfigLayers` returned in
`layer_io.rs`.
- `codex-rs/core/src/config_loader/mod.rs` has major changes to
`load_config_layers_state()`, which is what produces `ConfigLayerStack`.
The docstring has the new specification and describes the various layers
that will be loaded and the precedence order.
- It uses the information from `LoaderOverrides` "twice," both in the
spirit of legacy support:
- We use one instances to derive an instance of `ConfigRequirements`.
Currently, the only field in `managed_config.toml` that contributes to
`ConfigRequirements` is `approval_policy`. This PR introduces
`Constrained::allow_only()` to support this.
- We use a clone of `LoaderOverrides` to derive
`ConfigLayerSource::LegacyManagedConfigTomlFromFile` and
`ConfigLayerSource::LegacyManagedConfigTomlFromMdm` layers, as
appropriate. As before, this ends up being a "best effort" at enterprise
controls, but is enforcement is not guaranteed like it is for
`ConfigRequirements`.
- Now we only create a "user" layer if `$CODEX_HOME/config.toml` exists.
(Previously, a user layer was always created for `ConfigLayerStack`.)
- Similarly, we only add a "session flags" layer if there are CLI
overrides.
- `config_loader/state.rs` contains the updated implementation for
`ConfigLayerStack`. Note the public API is largely the same as before,
but the implementation is quite different. We leverage the fact that
`ConfigLayerSource` is now `PartialOrd` to ensure layers are in the
correct order.
- A `Config` constructed via `ConfigBuilder.build()` will use
`load_config_layers_state()` to create the `ConfigLayerStack` and use
the associated `ConfigRequirements` when constructing the `Config`
object.
- That said, a `Config` constructed via
`Config::load_from_base_config_with_overrides()` does _not_ yet use
`ConfigBuilder`, so it creates a `ConfigRequirements::default()` instead
of loading a proper `ConfigRequirements`. I will fix this in a
subsequent PR.
Then the following files are mostly test changes:
```
codex-rs/app-server/tests/suite/v2/config_rpc.rs
codex-rs/core/src/config/service.rs
codex-rs/core/src/config_loader/tests.rs
```
Again, because we do not always include "user" and "session flags"
layers when the contents are empty, `ConfigLayerStack` sometimes has
fewer layers than before (and the precedence order changed slightly),
which is the main reason integration tests changed.
This attempts to tighten up the types related to "config layers."
Currently, `ConfigLayerEntry` is defined as follows:
https://github.com/openai/codex/blob/bef36f4ae765f471d7cd69372fcf1b92c8f0367a/codex-rs/core/src/config_loader/state.rs#L19-L25
but the `source` field is a bit of a lie, as:
- for `ConfigLayerName::Mdm`, it is
`"com.openai.codex/config_toml_base64"`
- for `ConfigLayerName::SessionFlags`, it is `"--config"`
- for `ConfigLayerName::User`, it is `"config.toml"` (just the file
name, not the path to the `config.toml` on disk that was read)
- for `ConfigLayerName::System`, it seems like it is usually
`/etc/codex/managed_config.toml` in practice, though on Windows, it is
`%CODEX_HOME%/managed_config.toml`:
https://github.com/openai/codex/blob/bef36f4ae765f471d7cd69372fcf1b92c8f0367a/codex-rs/core/src/config_loader/layer_io.rs#L84-L101
All that is to say, in three out of the four `ConfigLayerName`, `source`
is a `PathBuf` that is not an absolute path (or even a true path).
This PR tries to uplevel things by eliminating `source` from
`ConfigLayerEntry` and turning `ConfigLayerName` into a disjoint union
named `ConfigLayerSource` that has the appropriate metadata for each
variant, favoring the use of `AbsolutePathBuf` where appropriate:
```rust
pub enum ConfigLayerSource {
/// Managed preferences layer delivered by MDM (macOS only).
#[serde(rename_all = "camelCase")]
#[ts(rename_all = "camelCase")]
Mdm { domain: String, key: String },
/// Managed config layer from a file (usually `managed_config.toml`).
#[serde(rename_all = "camelCase")]
#[ts(rename_all = "camelCase")]
System { file: AbsolutePathBuf },
/// Session-layer overrides supplied via `-c`/`--config`.
SessionFlags,
/// User config layer from a file (usually `config.toml`).
#[serde(rename_all = "camelCase")]
#[ts(rename_all = "camelCase")]
User { file: AbsolutePathBuf },
}
```
This PR makes sure that inline comment is preserved for mcp server
config and arbitrary key/value setPath config.
---------
Co-authored-by: celia-oai <celia@openai.com>
gt-oai