diff --git a/apps/desktop/src/i18n/locales/az.ts b/apps/desktop/src/i18n/locales/az.ts
index cd4aa50538..b38e72b76d 100644
--- a/apps/desktop/src/i18n/locales/az.ts
+++ b/apps/desktop/src/i18n/locales/az.ts
@@ -8150,7 +8150,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Vəziyyəti yenidən yüklə",
mcpHttpServiceTitle: "Streamable HTTP xidməti",
mcpHttpStatusLabelRunning: "İşləyir",
- mcpHttpStatusLabelPending: "Konfiqurasiya gözlənilir",
+ mcpHttpStatusLabelNotRunning: "İşləmir",
mcpHttpServiceDescription: "Standart olaraq deaktivdir. Aktivləşdirildikdə DBX Desktop xidməti işlədir; yuxarıdakı konfiqurasiya faktiki dinləyən xidmətə yalnız yadda saxlandıqdan sonra tətbiq edilir.",
mcpHttpListenerTitle: "Dinləyici konfiqurasiyası",
mcpHttpListenerHintPrefix: "Bu dəyəri saxlamağı tövsiyə edirik: ",
@@ -8169,11 +8169,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Uzaqdan giriş deaktiv olduqda icazə siyahıları lazım deyil.",
mcpHttpUnsavedChangesHint: "Yuxarıdakı konfiqurasiya hələ yadda saxlanılmayıb; işləyən xidmət dərhal dəyişməyəcək.",
- mcpHttpSaveHint: "Yadda saxlama xidməti başladır və ya yenidən başladır və aşağıdakı əlaqə təfərrüatlarını yeniləyir.",
- mcpHttpReload: "Yenidən yüklə",
- mcpHttpSaveAndStart: "Yadda saxla və xidməti başlat",
+ mcpHttpSaveHint: "Yadda saxlama keçidə uyğun olaraq xidməti başladır, yenidən başladır və ya dayandırır və aşağıdakı əlaqə təfərrüatlarını yeniləyir.",
+ mcpHttpApply: "Yadda saxla və tətbiq et",
mcpHttpDisabledHint: "Dinləmə ünvanını, uzaqdan giriş icazə siyahılarını və müştəri əlaqəsi təfərrüatlarını tənzimləmək üçün xidməti aktivləşdirin.",
- mcpHttpSaveAndStop: "Yadda saxla və xidməti dayandır",
mcpHttpConnectionInfoTitle: "Aktiv müştəri əlaqəsinin təfərrüatları",
mcpHttpServiceNotRunning: "Xidmət işləmir",
mcpHttpRunningConfigBadge: "İşləyən konfiqurasiya",
diff --git a/apps/desktop/src/i18n/locales/en.ts b/apps/desktop/src/i18n/locales/en.ts
index e988222a1e..6aa3554b74 100644
--- a/apps/desktop/src/i18n/locales/en.ts
+++ b/apps/desktop/src/i18n/locales/en.ts
@@ -8834,7 +8834,7 @@ export default {
mcpHttpReloadStatus: "Reload status",
mcpHttpServiceTitle: "Streamable HTTP service",
mcpHttpStatusLabelRunning: "Running",
- mcpHttpStatusLabelPending: "Pending configuration",
+ mcpHttpStatusLabelNotRunning: "Not running",
mcpHttpServiceDescription: "Off by default. When enabled, DBX Desktop hosts the service; the configuration above is applied to the actual listening service only after saving.",
mcpHttpListenerTitle: "Listener configuration",
mcpHttpListenerHintPrefix: "We recommend keeping ",
@@ -8853,11 +8853,9 @@ export default {
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "While remote access is off, the allowlists are not needed.",
mcpHttpUnsavedChangesHint: "The configuration above is not saved yet; the running service will not change immediately.",
- mcpHttpSaveHint: "Saving starts or restarts the service and updates the connection details below.",
- mcpHttpReload: "Reload",
- mcpHttpSaveAndStart: "Save and start service",
+ mcpHttpSaveHint: "Saving starts, restarts, or stops the service according to the toggle and updates the connection details below.",
+ mcpHttpApply: "Save and apply",
mcpHttpDisabledHint: "Enable the service to configure the listen address, remote access allowlists, and client connection details.",
- mcpHttpSaveAndStop: "Save and stop service",
mcpHttpConnectionInfoTitle: "Active client connection details",
mcpHttpServiceNotRunning: "The service is not running",
mcpHttpRunningConfigBadge: "Running config",
diff --git a/apps/desktop/src/i18n/locales/es.ts b/apps/desktop/src/i18n/locales/es.ts
index 2c29e5d46d..809a8a5871 100644
--- a/apps/desktop/src/i18n/locales/es.ts
+++ b/apps/desktop/src/i18n/locales/es.ts
@@ -8143,7 +8143,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Recargar estado",
mcpHttpServiceTitle: "Servicio Streamable HTTP",
mcpHttpStatusLabelRunning: "En ejecución",
- mcpHttpStatusLabelPending: "Pendiente de aplicar",
+ mcpHttpStatusLabelNotRunning: "No ejecutándose",
mcpHttpServiceDescription: "Desactivado por defecto. Al activarlo, DBX Desktop aloja el servicio; la configuración de arriba se aplica al servicio de escucha real solo después de guardar.",
mcpHttpListenerTitle: "Configuración de escucha",
mcpHttpListenerHintPrefix: "Se recomienda mantener ",
@@ -8162,11 +8162,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Con el acceso remoto desactivado, las listas blancas no son necesarias.",
mcpHttpUnsavedChangesHint: "La configuración de arriba aún no se ha guardado; el servicio en ejecución no cambiará de inmediato.",
- mcpHttpSaveHint: "Al guardar se inicia o reinicia el servicio y se actualiza la información de conexión de abajo.",
- mcpHttpReload: "Recargar",
- mcpHttpSaveAndStart: "Guardar e iniciar servicio",
+ mcpHttpSaveHint: "Al guardar, el servicio se inicia, reinicia o detiene según el interruptor y se actualiza la información de conexión de abajo.",
+ mcpHttpApply: "Guardar y aplicar",
mcpHttpDisabledHint: "Activa el servicio para configurar la dirección de escucha, las listas blancas de acceso remoto y la información de conexión del cliente.",
- mcpHttpSaveAndStop: "Guardar y detener servicio",
mcpHttpConnectionInfoTitle: "Información de conexión del cliente aplicada",
mcpHttpServiceNotRunning: "El servicio no está en ejecución",
mcpHttpRunningConfigBadge: "Configuración en ejecución",
diff --git a/apps/desktop/src/i18n/locales/it.ts b/apps/desktop/src/i18n/locales/it.ts
index c9927e707f..057c3b9e02 100644
--- a/apps/desktop/src/i18n/locales/it.ts
+++ b/apps/desktop/src/i18n/locales/it.ts
@@ -8068,7 +8068,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Ricarica stato",
mcpHttpServiceTitle: "Servizio Streamable HTTP",
mcpHttpStatusLabelRunning: "In esecuzione",
- mcpHttpStatusLabelPending: "In attesa di applicazione",
+ mcpHttpStatusLabelNotRunning: "Non in esecuzione",
mcpHttpServiceDescription: "Disattivato per impostazione predefinita. Se attivato, DBX Desktop ospita il servizio; la configurazione sopra viene applicata al servizio in ascolto solo dopo il salvataggio.",
mcpHttpListenerTitle: "Configurazione di ascolto",
mcpHttpListenerHintPrefix: "Si consiglia di mantenere ",
@@ -8087,11 +8087,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Con l'accesso remoto disattivato, gli elenchi consentiti non sono necessari.",
mcpHttpUnsavedChangesHint: "La configurazione sopra non è ancora salvata; il servizio in esecuzione non cambierà subito.",
- mcpHttpSaveHint: "Il salvataggio avvia o riavvia il servizio e aggiorna le informazioni di connessione sotto.",
- mcpHttpReload: "Ricarica",
- mcpHttpSaveAndStart: "Salva e avvia servizio",
+ mcpHttpSaveHint: "Il salvataggio avvia, riavvia o arresta il servizio in base all'interruttore e aggiorna le informazioni di connessione sotto.",
+ mcpHttpApply: "Salva e applica",
mcpHttpDisabledHint: "Attiva il servizio per configurare indirizzo di ascolto, elenchi di accesso remoto e informazioni di connessione del client.",
- mcpHttpSaveAndStop: "Salva e ferma servizio",
mcpHttpConnectionInfoTitle: "Informazioni di connessione del client applicate",
mcpHttpServiceNotRunning: "Il servizio non è in esecuzione",
mcpHttpRunningConfigBadge: "Configurazione in esecuzione",
diff --git a/apps/desktop/src/i18n/locales/ja.ts b/apps/desktop/src/i18n/locales/ja.ts
index 79b3342e2a..302911cfb8 100644
--- a/apps/desktop/src/i18n/locales/ja.ts
+++ b/apps/desktop/src/i18n/locales/ja.ts
@@ -8065,7 +8065,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "状態を再読み込み",
mcpHttpServiceTitle: "Streamable HTTP サービス",
mcpHttpStatusLabelRunning: "実行中",
- mcpHttpStatusLabelPending: "設定待ち",
+ mcpHttpStatusLabelNotRunning: "未実行",
mcpHttpServiceDescription: "既定では無効です。有効にすると DBX Desktop がサービスをホストし、保存後には上記の設定が実際のリスニングサービスに適用されます。",
mcpHttpListenerTitle: "リスニング設定",
mcpHttpListenerHintPrefix: "「",
@@ -8084,11 +8084,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: "）。",
mcpHttpRemoteDisabledHint: "リモートアクセスが無効の場合、ホワイトリストの設定は不要です。",
mcpHttpUnsavedChangesHint: "上記の設定は未保存のため、実行中のサービスはすぐには変更されません。",
- mcpHttpSaveHint: "保存するとサービスを開始または再起動し、下記の接続情報を更新します。",
- mcpHttpReload: "再読み込み",
- mcpHttpSaveAndStart: "保存してサービスを開始",
+ mcpHttpSaveHint: "保存するとトグルの状態に応じてサービスを開始、再起動、または停止し、下記の接続情報を更新します。",
+ mcpHttpApply: "保存して適用",
mcpHttpDisabledHint: "サービスを有効にすると、リスニングアドレス、リモートアクセスのホワイトリスト、クライアント接続情報を設定できます。",
- mcpHttpSaveAndStop: "保存してサービスを停止",
mcpHttpConnectionInfoTitle: "適用済みのクライアント接続情報",
mcpHttpServiceNotRunning: "サービスは実行されていません",
mcpHttpRunningConfigBadge: "実行中の設定",
diff --git a/apps/desktop/src/i18n/locales/ko.ts b/apps/desktop/src/i18n/locales/ko.ts
index 9912182de8..db13a10e59 100644
--- a/apps/desktop/src/i18n/locales/ko.ts
+++ b/apps/desktop/src/i18n/locales/ko.ts
@@ -7852,7 +7852,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "상태 다시 불러오기",
mcpHttpServiceTitle: "Streamable HTTP 서비스",
mcpHttpStatusLabelRunning: "실행 중",
- mcpHttpStatusLabelPending: "적용 대기 중",
+ mcpHttpStatusLabelNotRunning: "실행되지 않음",
mcpHttpServiceDescription: "기본적으로 꺼져 있습니다. 활성화하면 DBX Desktop이 서비스를 호스팅하며, 저장 후에야 위 설정이 실제 수신 서비스에 적용됩니다.",
mcpHttpListenerTitle: "수신 설정",
mcpHttpListenerHintPrefix: "",
@@ -7871,11 +7871,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ").",
mcpHttpRemoteDisabledHint: "원격 접근이 꺼져 있으면 화이트리스트를 구성할 필요가 없습니다.",
mcpHttpUnsavedChangesHint: "위 설정이 아직 저장되지 않아 실행 중인 서비스는 즉시 변경되지 않습니다.",
- mcpHttpSaveHint: "저장하면 서비스를 시작하거나 재시작하고 아래 접속 정보를 갱신합니다.",
- mcpHttpReload: "다시 불러오기",
- mcpHttpSaveAndStart: "저장하고 서비스 시작",
+ mcpHttpSaveHint: "저장하면 토글 상태에 따라 서비스를 시작, 재시작 또는 중지하고 아래 접속 정보를 갱신합니다.",
+ mcpHttpApply: "저장하고 적용",
mcpHttpDisabledHint: "서비스를 활성화하면 수신 주소, 원격 접근 화이트리스트, 클라이언트 접속 정보를 구성할 수 있습니다.",
- mcpHttpSaveAndStop: "저장하고 서비스 중지",
mcpHttpConnectionInfoTitle: "적용된 클라이언트 접속 정보",
mcpHttpServiceNotRunning: "서비스가 실행 중이 아닙니다",
mcpHttpRunningConfigBadge: "실행 설정",
diff --git a/apps/desktop/src/i18n/locales/pt-BR.ts b/apps/desktop/src/i18n/locales/pt-BR.ts
index f0a7665ea4..3735f58f1c 100644
--- a/apps/desktop/src/i18n/locales/pt-BR.ts
+++ b/apps/desktop/src/i18n/locales/pt-BR.ts
@@ -8069,7 +8069,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Recarregar status",
mcpHttpServiceTitle: "Serviço Streamable HTTP",
mcpHttpStatusLabelRunning: "Em execução",
- mcpHttpStatusLabelPending: "Pendente de aplicação",
+ mcpHttpStatusLabelNotRunning: "Não está em execução",
mcpHttpServiceDescription: "Desativado por padrão. Quando ativado, o DBX Desktop hospeda o serviço; a configuração acima só é aplicada ao serviço de escuta real após salvar.",
mcpHttpListenerTitle: "Configuração de escuta",
mcpHttpListenerHintPrefix: "Recomendamos manter ",
@@ -8088,11 +8088,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Com o acesso remoto desativado, as listas de permissão não são necessárias.",
mcpHttpUnsavedChangesHint: "A configuração acima ainda não foi salva; o serviço em execução não mudará imediatamente.",
- mcpHttpSaveHint: "Ao salvar, o serviço é iniciado ou reiniciado e as informações de conexão abaixo são atualizadas.",
- mcpHttpReload: "Recarregar",
- mcpHttpSaveAndStart: "Salvar e iniciar serviço",
+ mcpHttpSaveHint: "Ao salvar, o serviço é iniciado, reiniciado ou parado conforme o interruptor, e as informações de conexão abaixo são atualizadas.",
+ mcpHttpApply: "Salvar e aplicar",
mcpHttpDisabledHint: "Ative o serviço para configurar endereço de escuta, listas de acesso remoto e informações de conexão do cliente.",
- mcpHttpSaveAndStop: "Salvar e parar serviço",
mcpHttpConnectionInfoTitle: "Informações de conexão do cliente em vigor",
mcpHttpServiceNotRunning: "O serviço não está em execução",
mcpHttpRunningConfigBadge: "Configuração em execução",
diff --git a/apps/desktop/src/i18n/locales/ru.ts b/apps/desktop/src/i18n/locales/ru.ts
index 15d81d3cdb..82899f403c 100644
--- a/apps/desktop/src/i18n/locales/ru.ts
+++ b/apps/desktop/src/i18n/locales/ru.ts
@@ -9348,7 +9348,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Состояние перезагрузки",
mcpHttpServiceTitle: "Служба Streamable HTTP",
mcpHttpStatusLabelRunning: "Работает",
- mcpHttpStatusLabelPending: "Ожидает настройки",
+ mcpHttpStatusLabelNotRunning: "Не запущено",
mcpHttpServiceDescription: "По умолчанию отключена. При включении DBX Desktop размещает службу; приведённая выше конфигурация применяется к фактической службе прослушивания только после сохранения.",
mcpHttpListenerTitle: "Конфигурация прослушивания",
mcpHttpListenerHintPrefix: "Рекомендуем оставить ",
@@ -9367,11 +9367,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Пока удалённый доступ отключён, списки разрешённых не нужны.",
mcpHttpUnsavedChangesHint: "Приведённая выше конфигурация ещё не сохранена; работающая служба не изменится немедленно.",
- mcpHttpSaveHint: "Сохранение запускает или перезапускает службу и обновляет сведения о подключении ниже.",
- mcpHttpReload: "Перезагрузить",
- mcpHttpSaveAndStart: "Сохранить и запустить службу",
+ mcpHttpSaveHint: "Сохранение запускает, перезапускает или останавливает службу в соответствии с переключателем и обновляет сведения о подключении ниже.",
+ mcpHttpApply: "Сохранить и применить",
mcpHttpDisabledHint: "Включите службу, чтобы настроить адрес прослушивания, списки разрешённых для удалённого доступа и сведения о подключении клиента.",
- mcpHttpSaveAndStop: "Сохранить и остановить службу",
mcpHttpConnectionInfoTitle: "Сведения о подключении активного клиента",
mcpHttpServiceNotRunning: "Служба не запущена",
mcpHttpRunningConfigBadge: "Работающая конфигурация",
diff --git a/apps/desktop/src/i18n/locales/tr.ts b/apps/desktop/src/i18n/locales/tr.ts
index 4da500bf4d..cb26a868b8 100644
--- a/apps/desktop/src/i18n/locales/tr.ts
+++ b/apps/desktop/src/i18n/locales/tr.ts
@@ -8048,7 +8048,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "Durumu yeniden yükle",
mcpHttpServiceTitle: "Streamable HTTP servisi",
mcpHttpStatusLabelRunning: "Çalışıyor",
- mcpHttpStatusLabelPending: "Yapılandırma bekliyor",
+ mcpHttpStatusLabelNotRunning: "Çalışmıyor",
mcpHttpServiceDescription: "Varsayılan olarak kapalı. Etkinleştirildiğinde servisi DBX Masaüstü barındırır; yukarıdaki yapılandırma yalnızca kaydedildikten sonra çalışan servise uygulanır.",
mcpHttpListenerTitle: "Dinleyici yapılandırması",
mcpHttpListenerHintPrefix: "Şunu korumanızı öneririz: ",
@@ -8067,11 +8067,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: ".",
mcpHttpRemoteDisabledHint: "Uzaktan erişim kapalıyken izin listelerine gerek yoktur.",
mcpHttpUnsavedChangesHint: "Yukarıdaki yapılandırma henüz kaydedilmedi; çalışan servis hemen değişmeyecek.",
- mcpHttpSaveHint: "Kaydetmek servisi başlatır veya yeniden başlatır ve aşağıdaki bağlantı ayrıntılarını günceller.",
- mcpHttpReload: "Yeniden yükle",
- mcpHttpSaveAndStart: "Kaydet ve servisi başlat",
+ mcpHttpSaveHint: "Kaydetmek, anahtara göre servisi başlatır, yeniden başlatır veya durdurur ve aşağıdaki bağlantı ayrıntılarını günceller.",
+ mcpHttpApply: "Kaydet ve uygula",
mcpHttpDisabledHint: "Dinleme adresini, uzaktan erişim izin listelerini ve istemci bağlantı ayrıntılarını yapılandırmak için servisi etkinleştirin.",
- mcpHttpSaveAndStop: "Kaydet ve servisi durdur",
mcpHttpConnectionInfoTitle: "Etkin istemci bağlantı ayrıntıları",
mcpHttpServiceNotRunning: "Servis çalışmıyor",
mcpHttpRunningConfigBadge: "Çalışan yapılandırma",
diff --git a/apps/desktop/src/i18n/locales/zh-CN.ts b/apps/desktop/src/i18n/locales/zh-CN.ts
index ca989e83ae..1aa44ce536 100644
--- a/apps/desktop/src/i18n/locales/zh-CN.ts
+++ b/apps/desktop/src/i18n/locales/zh-CN.ts
@@ -8800,7 +8800,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "重新加载状态",
mcpHttpServiceTitle: "Streamable HTTP 服务",
mcpHttpStatusLabelRunning: "运行中",
- mcpHttpStatusLabelPending: "待应用配置",
+ mcpHttpStatusLabelNotRunning: "未运行",
mcpHttpServiceDescription: "默认关闭。启用后由 DBX Desktop 托管服务；保存后才会将上方配置应用到实际监听服务。",
mcpHttpListenerTitle: "监听配置",
mcpHttpListenerHintPrefix: "推荐保留 ",
@@ -8819,11 +8819,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: "。",
mcpHttpRemoteDisabledHint: "未开启远程访问时，白名单无需配置。",
mcpHttpUnsavedChangesHint: "上方配置尚未保存，当前运行服务不会立即改变。",
- mcpHttpSaveHint: "保存后会启动或重启服务，并更新下方接入信息。",
- mcpHttpReload: "重新加载",
- mcpHttpSaveAndStart: "保存并启动服务",
+ mcpHttpSaveHint: "保存后会根据开关状态启动、重启或停止服务，并更新下方接入信息。",
+ mcpHttpApply: "保存并应用",
mcpHttpDisabledHint: "启用服务后可配置监听地址、远程访问白名单和客户端接入信息。",
- mcpHttpSaveAndStop: "保存并停止服务",
mcpHttpConnectionInfoTitle: "已生效的客户端接入信息",
mcpHttpServiceNotRunning: "服务当前未运行",
mcpHttpRunningConfigBadge: "运行配置",
diff --git a/apps/desktop/src/i18n/locales/zh-TW.ts b/apps/desktop/src/i18n/locales/zh-TW.ts
index 960470dd9d..a78d68feed 100644
--- a/apps/desktop/src/i18n/locales/zh-TW.ts
+++ b/apps/desktop/src/i18n/locales/zh-TW.ts
@@ -7431,7 +7431,7 @@ export default withEnglishFallback({
mcpHttpReloadStatus: "重新載入狀態",
mcpHttpServiceTitle: "Streamable HTTP 服務",
mcpHttpStatusLabelRunning: "執行中",
- mcpHttpStatusLabelPending: "待套用設定",
+ mcpHttpStatusLabelNotRunning: "未執行",
mcpHttpServiceDescription: "預設關閉。啟用後由 DBX Desktop 託管服務；儲存後才會將上方設定套用到實際監聽服務。",
mcpHttpListenerTitle: "監聽設定",
mcpHttpListenerHintPrefix: "建議保留 ",
@@ -7450,11 +7450,9 @@ export default withEnglishFallback({
mcpHttpOriginsHintSuffix: "。",
mcpHttpRemoteDisabledHint: "未開啟遠端存取時，白名單無需設定。",
mcpHttpUnsavedChangesHint: "上方設定尚未儲存，目前執行服務不會立即改變。",
- mcpHttpSaveHint: "儲存後會啟動或重新啟動服務，並更新下方接入資訊。",
- mcpHttpReload: "重新載入",
- mcpHttpSaveAndStart: "儲存並啟動服務",
+ mcpHttpSaveHint: "儲存後會依開關狀態啟動、重新啟動或停止服務，並更新下方接入資訊。",
+ mcpHttpApply: "儲存並套用",
mcpHttpDisabledHint: "啟用服務後可設定監聽位址、遠端存取白名單和用戶端接入資訊。",
- mcpHttpSaveAndStop: "儲存並停止服務",
mcpHttpConnectionInfoTitle: "已生效的用戶端接入資訊",
mcpHttpServiceNotRunning: "服務目前未執行",
mcpHttpRunningConfigBadge: "執行設定",
diff --git a/crates/dbx-mcp/src/http_auth.rs b/crates/dbx-mcp/src/http_auth.rs
index 908ca140a4..53ce38c9fa 100644
--- a/crates/dbx-mcp/src/http_auth.rs
+++ b/crates/dbx-mcp/src/http_auth.rs
@@ -326,6 +326,7 @@ mod tests {
assert!(!auth.host_is_allowed(&uri, &headers));
assert!(parse_host_rule("https://dbx.example.test").is_err());
assert!(parse_host_rule("user@dbx.example.test:4224").is_err());
+ assert!(parse_host_rule("[::1]").is_ok());
}
#[test]
diff --git a/crates/dbx-mcp/src/runtime.rs b/crates/dbx-mcp/src/runtime.rs
index 27edd94d53..7bc0a82119 100644
--- a/crates/dbx-mcp/src/runtime.rs
+++ b/crates/dbx-mcp/src/runtime.rs
@@ -108,9 +108,13 @@ impl RuntimeConfig {
}
let token = http_token_from_environment()?;
- let auth = HttpAuth::new(token, allowed_origins.clone(), is_loopback)?;
- let allowed_hosts =
- if is_loopback { vec!["localhost".into(), "127.0.0.1".into(), "::1".into()] } else { allowed_hosts };
+ let allowed_hosts = if is_loopback {
+ // HTTP Host authorities require brackets around IPv6 literals.
+ vec!["localhost".into(), "127.0.0.1".into(), "[::1]".into()]
+ } else {
+ allowed_hosts
+ };
+ let auth = HttpAuth::new_with_hosts(Some(token), allowed_hosts.clone(), allowed_origins.clone(), is_loopback)?;
Ok(Self { transport, http: Some(HttpRuntimeConfig { bind_addr, path, auth, allowed_hosts }) })
}
diff --git a/docs/content/docs/mcp.cn.mdx b/docs/content/docs/mcp.cn.mdx
index b64cdda195..805a6bf6af 100644
--- a/docs/content/docs/mcp.cn.mdx
+++ b/docs/content/docs/mcp.cn.mdx
@@ -255,7 +255,7 @@ Desktop 可以选择直接托管 Streamable HTTP MCP 服务。该服务**默认
本机 MCP 客户端的接入步骤：
1. 打开 **设置 → MCP → HTTP 服务**，开启 **Streamable HTTP 服务**。除非确实需要让其他设备访问，否则保持默认本机回环地址。
-2. 点击 **保存并启动服务**。修改地址、端口或路径后保存，会通过重启服务来应用新配置。
+2. 点击 **保存并应用**。该按钮会保存配置，并根据开关状态启动、重启或停止服务；修改地址、端口或路径时会自动重启服务。
3. 将页面展示的服务地址和 Bearer Token 复制到 MCP 客户端。
不同客户端的字段名称可能不同，但核心配置如下：
@@ -383,7 +383,7 @@ DBX 在 **设置 → MCP** 中保存一份权威策略，并在每次请求时
不要使用 `--no-optional`，重新安装 `@dbx-app/mcp-server`，并用 `node -p 'process.platform + "-" + process.arch'` 检查平台。Alpine Linux 默认使用 musl，目前不在 Linux 发布包支持范围内。将 `DBX_DATA_DIR` 设置为包含 `dbx.db` 的目录。Windows 便携版通常是 `DBX.exe` 旁边的 `data` 目录。只有 `dbx_open_table` 和 `dbx_execute_and_show` 需要桌面端运行；本地查询工具可以在 DBX 关闭时执行。
- 进入 **设置 → MCP → HTTP 服务**，确认服务已开启并点击 **保存并启动服务**。客户端应使用页面展示的地址、路径和当前 Bearer Token。默认的 `127.0.0.1` 只接受同一台电脑上的连接。
+ 进入 **设置 → MCP → HTTP 服务**，确认服务已开启并点击 **保存并应用**。客户端应使用页面展示的地址、路径和当前 Bearer Token。默认的 `127.0.0.1` 只接受同一台电脑上的连接。已有其他进程监听了所选地址和端口。请在 **设置 → MCP → HTTP 服务** 中改用未被占用的端口，再保存配置以重启服务。不要让两个 DBX Desktop 实例使用相同 HTTP 端点。该连接虽然已暴露给 MCP，但请求的数据库不在它的 MCP 数据库范围内。请在 **设置 → MCP** 中添加精确的数据库名称，或在合适时将该连接设为全部数据库。指定范围时，应先调用 `dbx_list_databases`，再使用返回的名称。该工具已不在 **设置 → MCP** 的选中范围内，或当前权限策略不允许它。修改工具 allowlist 后请刷新 MCP 客户端的工具列表；服务端同样会拒绝缓存的旧工具调用。
diff --git a/docs/content/docs/mcp.mdx b/docs/content/docs/mcp.mdx
index 4ea5bf8460..b6dcd1304e 100644
--- a/docs/content/docs/mcp.mdx
+++ b/docs/content/docs/mcp.mdx
@@ -255,7 +255,7 @@ Desktop can optionally host its own Streamable HTTP MCP endpoint. It is **off by
To connect a local MCP client:
1. Open **Settings → MCP → HTTP Service**, turn on **Streamable HTTP Service**, and keep the default loopback address unless another device genuinely needs access.
-2. Click **Save and start service**. Saving a changed address, port, or path applies the configuration by restarting the service.
+2. Click **Save and apply**. The button saves the configuration and starts, restarts, or stops the service according to the toggle; changing the address, port, or path restarts the service automatically.
3. Copy the displayed service address and bearer token into the MCP client.
Use the generated values in an HTTP-capable MCP client. The transport-specific field names differ between clients, but the essential configuration is:
@@ -383,7 +383,7 @@ Updated servers do not let `DBX_MCP_ALLOW_WRITES` or `DBX_MCP_ALLOW_DANGEROUS_SQ
Reinstall without `--no-optional`, then verify the platform with `node -p 'process.platform + "-" + process.arch'`. The current platform must appear in the supported platform table.Set `DBX_DATA_DIR` to the folder containing `dbx.db`. For Windows portable builds, this is normally the `data` folder beside `DBX.exe`.Only `dbx_open_table` and `dbx_execute_and_show` require the desktop app. Local query tools can run without DBX open.
- In **Settings → MCP → HTTP Service**, turn on the service and click **Save and start service**. Confirm that the client uses the displayed address, path, and current bearer token. The default `127.0.0.1` address accepts connections only from the same computer.
+ In **Settings → MCP → HTTP Service**, turn on the service and click **Save and apply**. Confirm that the client uses the displayed address, path, and current bearer token. The default `127.0.0.1` address accepts connections only from the same computer.Another process is listening on the selected address and port. Choose an unused port in **Settings → MCP → HTTP Service**, then save the configuration to restart the service. Do not run two DBX Desktop instances with the same HTTP endpoint.The connection is exposed, but the requested database is not in its MCP database scope. Add the exact database name in **Settings → MCP**, or change that connection's scope to all databases if appropriate. For a specified scope, call `dbx_list_databases` first and then use one of the returned names.The tool is no longer selected in **Settings → MCP** or the current policy does not permit it. Refresh the MCP client's tool list after changing the allowlist; the server rejects stale tool calls as well.
diff --git a/docs/mcp-management-layout-redesign.md b/docs/mcp-management-layout-redesign.md
index 4453d89bc2..cb264c2eaa 100644
--- a/docs/mcp-management-layout-redesign.md
+++ b/docs/mcp-management-layout-redesign.md
@@ -114,7 +114,7 @@ Tab 图标使用 `ShieldCheck`，说明文本保持简短：
查询超时等运行级设置也放在“接入方式”下的“运行参数”区域；权限管理只负责资源范围、数据库范围、操作权限和工具可用性。
-HTTP 的保存动作固定在配置内容底部，使用“保存并启动/保存并停止”；不要让每个字段单独触发保存。
+HTTP 的保存动作固定在配置内容底部，使用单一的“保存并应用”按钮；它根据启用开关启动、重启或停止服务，不让每个字段单独触发保存。
### 客户端配置的归属
diff --git a/src-tauri/src/commands/mcp_http_server.rs b/src-tauri/src/commands/mcp_http_server.rs
index d24ee01392..676e2435e4 100644
--- a/src-tauri/src/commands/mcp_http_server.rs
+++ b/src-tauri/src/commands/mcp_http_server.rs
@@ -217,11 +217,22 @@ impl McpHttpServerState {
let ip = settings.host.parse::().map_err(|_| "MCP HTTP host must be an IP address".to_string())?;
let bind_addr = SocketAddr::new(ip, settings.port);
let allowed_hosts = if ip.is_loopback() {
- vec!["localhost".to_string(), "127.0.0.1".to_string(), "::1".to_string()]
+ // IPv6 authorities must be bracketed when they are parsed as HTTP
+ // Host rules. The parser still normalizes the host to `::1` for
+ // request matching, so this accepts both loopback address forms.
+ vec!["localhost".to_string(), "127.0.0.1".to_string(), "[::1]".to_string()]
} else {
settings.allowed_hosts.clone()
};
- let auth = HttpAuth::new(token, settings.allowed_origins.clone(), ip.is_loopback())?;
+ // Validate the Host rules before replacing the current listener. This
+ // keeps invalid configuration errors on the save/start call instead
+ // of reporting success and failing later inside the server task.
+ let auth = HttpAuth::new_with_hosts(
+ Some(token),
+ allowed_hosts.clone(),
+ settings.allowed_origins.clone(),
+ ip.is_loopback(),
+ )?;
Ok(HttpRuntimeConfig::new(bind_addr, settings.path.clone(), auth, allowed_hosts))
}