diff --git a/.vitepress/config/cn.ts b/.vitepress/config/cn.ts
index dd9eb9e..b9413b1 100644
--- a/.vitepress/config/cn.ts
+++ b/.vitepress/config/cn.ts
@@ -36,6 +36,7 @@ export const cn = defineConfig({
             { text: 'P2P 优化', link: '/guide/network/p2p-optimize' },
             { text: '魔法 DNS', link: '/guide/network/magic-dns' },
             { text: 'ACL', link: '/guide/config/acl' },
+            { text: 'EasyTier CNI（Kubernetes）', link: '/guide/network/easytier-cni' },
           ] },
           { text: '开机自启（注册服务）', collapsed: true, items: [
             { text: '一键安装服务', link: '/guide/network/oneclick-install-as-service' },
diff --git a/.vitepress/config/en.ts b/.vitepress/config/en.ts
index 6391759..c31b978 100644
--- a/.vitepress/config/en.ts
+++ b/.vitepress/config/en.ts
@@ -35,6 +35,7 @@ export const en = defineConfig({
             { text: 'P2P Optimization', link: '/en/guide/network/p2p-optimize' },
             { text: 'Magic DNS', link: '/en/guide/network/magic-dns' },
             { text: 'ACL', link: '/en/guide/config/acl' },
+            { text: 'EasyTier CNI (Kubernetes)', link: '/en/guide/network/easytier-cni' },
           ] },
           { text: 'Autostart (Register Service)', collapsed: true, items: [
             { text: 'One-Click Install Service', link: '/en/guide/network/oneclick-install-as-service' },
diff --git a/en/guide/introduction.md b/en/guide/introduction.md
index 4d0ca92..a4a3816 100644
--- a/en/guide/introduction.md
+++ b/en/guide/introduction.md
@@ -30,6 +30,7 @@ The software can be used via command line or graphical interface. It is ready to
 - **KCP / QUIC Proxy**: Converts TCP traffic to KCP / QUIC protocol, improving transmission latency and stability in high UDP packet loss environments.
 - **Non-Privileged Mode**: Supports running under non-privileged users, avoiding the need for root permissions (only as an accessed endpoint).
 - **WireGuard Access**: Supports WireGuard client access to the EasyTier network.
+- **Kubernetes Pod Networking**: Adds an EasyTier secondary network to Pods through [EasyTier CNI](/en/guide/network/easytier-cni).
 
 ## Graphical Interface (GUI)
 
diff --git a/en/guide/network/easytier-cni.md b/en/guide/network/easytier-cni.md
new file mode 100644
index 0000000..8d67801
--- /dev/null
+++ b/en/guide/network/easytier-cni.md
@@ -0,0 +1,124 @@
+# EasyTier CNI (Kubernetes)
+
+EasyTier CNI uses Multus to attach an EasyTier TUN as a secondary Pod interface. The existing primary CNI interface continues to provide Kubernetes Services, DNS, and the EasyTier underlay. Only traffic for the secondary virtual subnet uses EasyTier.
+
+```mermaid
+flowchart LR
+  A[Pod A net1] --> B[EasyTier Overlay]
+  B --> C[Pod B net1]
+  A -. eth0 .-> D[Primary CNI / Kubernetes network]
+  C -. eth0 .-> D
+```
+
+::: warning Current scope
+The initial release supports CNI `1.0.0`, one IPv4 address, and a standalone Multus delegate. It does not change the Pod default route or DNS and does not support a primary CNI, IPv6, or chained `prevResult`.
+:::
+
+## Prerequisites
+
+- Linux Kubernetes nodes with `/dev/net/tun`.
+- [Multus CNI](https://github.com/k8snetworkplumbingwg/multus-cni).
+- [Whereabouts](https://github.com/k8snetworkplumbingwg/whereabouts), or another IPAM plugin that returns one IPv4 address and no extra routes.
+- At least one EasyTier peer reachable through every Pod's primary network.
+- An EasyTier image containing both `easytier-core` and `easytier-cni`.
+
+::: warning Security
+The node DaemonSet must enter Pod network namespaces and create TUN devices, so it uses privileged mode, hostPID, and the host `/run`. Pin production deployments to an EasyTier release that contains CNI support. Do not deploy a mutable `unstable` tag in production.
+:::
+
+## 1. Create the network secret
+
+Do not put the EasyTier network secret in a `NetworkAttachmentDefinition`:
+
+```sh
+kubectl -n kube-system create secret generic easytier-cni \
+  --from-literal=network-secret="$EASYTIER_NETWORK_SECRET"
+```
+
+The DaemonSet installs the secret as a root-only node file. Management RPC uses a root-only Unix socket on the node and does not expose a TCP management port.
+
+## 2. Deploy the node DaemonSet
+
+Download the [official DaemonSet manifest](https://github.com/EasyTier/EasyTier/blob/main/easytier-contrib/easytier-cni/deploy/daemonset.yaml), pin both EasyTier image references to the same release, and deploy it:
+
+```sh
+kubectl apply -f daemonset.yaml
+kubectl -n kube-system rollout status daemonset/easytier-cni
+```
+
+Confirm that the plugin and management process are running on every node:
+
+```sh
+kubectl -n kube-system get pods -l app.kubernetes.io/name=easytier-cni -o wide
+```
+
+## 3. Create the secondary network
+
+Start with the [official NAD example](https://github.com/EasyTier/EasyTier/blob/main/easytier-contrib/easytier-cni/deploy/network-attachment-definition.yaml):
+
+```json
+{
+  "cniVersion": "1.0.0",
+  "name": "easytier",
+  "type": "easytier-cni",
+  "rpcPortal": "unix:///run/easytier-cni/rpc.sock",
+  "networkName": "kubernetes",
+  "networkSecretFile": "/etc/easytier-cni/network-secret",
+  "peers": ["tcp://192.0.2.10:11010"],
+  "mtu": 1380,
+  "timeoutSeconds": 30,
+  "ipam": {
+    "type": "whereabouts",
+    "range": "10.200.0.0/24",
+    "range_start": "10.200.0.10",
+    "range_end": "10.200.0.250"
+  }
+}
+```
+
+- `peers` must be reachable through the Pod's primary interface. Prefer IP addresses so CNI setup does not depend on cluster DNS.
+- The EasyTier range must not overlap node, Pod, Service, LAN, VPN, or container-runtime networks.
+- `mtu` is the EasyTier packet MTU. The TUN MTU excludes protocol overhead; for example, `1380` produces a TUN MTU of `1360`.
+
+Apply the completed NAD:
+
+```sh
+kubectl apply -f network-attachment-definition.yaml
+```
+
+## 4. Attach EasyTier to a Pod
+
+Add a Multus annotation to the Pod:
+
+```yaml
+apiVersion: v1
+kind: Pod
+metadata:
+  name: easytier-client
+  annotations:
+    k8s.v1.cni.cncf.io/networks: easytier
+spec:
+  containers:
+    - name: client
+      image: busybox:1.37.0
+      command: ["/bin/sh", "-c", "sleep 3600"]
+```
+
+The default secondary interface name is `net1`. Inspect its address and the Multus network status:
+
+```sh
+kubectl exec easytier-client -- ip address show net1
+kubectl get pod easytier-client \
+  -o jsonpath='{.metadata.annotations.k8s\.v1\.cni\.cncf\.io/network-status}'
+```
+
+After two Pods join the same EasyTier network, they can communicate directly through their `net1` IPv4 addresses.
+
+## Operations
+
+- Deleting a Pod removes its EasyTier instance and releases its Whereabouts address.
+- The node daemon persists attachments under `/var/lib/easytier-cni/configs`. This directory contains network credentials and must remain root-only.
+- After updating the Secret, restart the `easytier-cni` DaemonSet and recreate Pods that use the EasyTier network.
+- After uninstalling, remove `/etc/easytier-cni` and `/var/lib/easytier-cni` from nodes when appropriate.
+
+Complete configuration, automated netns tests, and the three-node Kind test are available under [`easytier-contrib/easytier-cni`](https://github.com/EasyTier/EasyTier/tree/main/easytier-contrib/easytier-cni).
diff --git a/guide/introduction.md b/guide/introduction.md
index eba8d61..d502bba 100644
--- a/guide/introduction.md
+++ b/guide/introduction.md
@@ -31,6 +31,7 @@ EasyTier 是一款简单、安全、去中心化的内网穿透和异地组网
 - **KCP / QUIC 代理**: 支持将 TCP 流量转为 KCP / QUIC 协议，提升高 UDP 丢包环境下的传输延迟和稳定性。
 - **非特权模式**：支持在非特权用户下运行，避免需要 root 权限。（仅可作为被访问端）
 - **WireGuard 接入**: 支持 WireGuard 客户端接入 EasyTier 网络。
+- **Kubernetes Pod 组网**：通过 [EasyTier CNI](/guide/network/easytier-cni) 为 Pod 添加 EasyTier 辅助网络。
 
 
 ## 图形界面（GUI）
diff --git a/guide/network/easytier-cni.md b/guide/network/easytier-cni.md
new file mode 100644
index 0000000..4ee7964
--- /dev/null
+++ b/guide/network/easytier-cni.md
@@ -0,0 +1,124 @@
+# EasyTier CNI（Kubernetes）
+
+EasyTier CNI 可以通过 Multus 为 Kubernetes Pod 添加一个 EasyTier TUN 辅助网卡。Pod 原有的主 CNI 网卡继续负责集群 Service、DNS 和 EasyTier 底层连接，EasyTier 网络只承载分配给辅助网卡的虚拟网段流量。
+
+```mermaid
+flowchart LR
+  A[Pod A net1] --> B[EasyTier Overlay]
+  B --> C[Pod B net1]
+  A -. eth0 .-> D[主 CNI / Kubernetes 网络]
+  C -. eth0 .-> D
+```
+
+::: warning 当前范围
+首版仅支持 CNI `1.0.0`、单个 IPv4 地址和 Multus standalone delegate。不修改 Pod 默认路由和 DNS，也不支持 Primary CNI、IPv6 或 chained `prevResult`。
+:::
+
+## 前置条件
+
+- Linux Kubernetes 节点，且存在 `/dev/net/tun`。
+- 已安装 [Multus CNI](https://github.com/k8snetworkplumbingwg/multus-cni)。
+- 已安装 [Whereabouts](https://github.com/k8snetworkplumbingwg/whereabouts)，或其他能返回单个 IPv4 且不返回额外路由的 IPAM 插件。
+- 每个 Pod 的主网络都能访问至少一个 EasyTier peer。
+- EasyTier 镜像包含 `easytier-core` 和 `easytier-cni`。
+
+::: warning 安全提示
+节点 DaemonSet 需要进入 Pod network namespace 并创建 TUN，因此会使用 privileged、hostPID 和宿主 `/run`。生产环境必须固定到包含 CNI 的正式 EasyTier 版本，不要直接使用可变的 `unstable` 标签。
+:::
+
+## 1. 创建网络密钥
+
+不要把 EasyTier 网络密钥写进 `NetworkAttachmentDefinition`：
+
+```sh
+kubectl -n kube-system create secret generic easytier-cni \
+  --from-literal=network-secret="$EASYTIER_NETWORK_SECRET"
+```
+
+DaemonSet 会把密钥以 root-only 文件安装到节点。管理 RPC 使用节点上的 root-only Unix socket，不会开放 TCP 管理端口。
+
+## 2. 部署节点 DaemonSet
+
+下载[官方 DaemonSet 清单](https://github.com/EasyTier/EasyTier/blob/main/easytier-contrib/easytier-cni/deploy/daemonset.yaml)，把两个 EasyTier 镜像都固定到相同的正式版本，然后部署：
+
+```sh
+kubectl apply -f daemonset.yaml
+kubectl -n kube-system rollout status daemonset/easytier-cni
+```
+
+确认每个节点都安装了插件并启动管理进程：
+
+```sh
+kubectl -n kube-system get pods -l app.kubernetes.io/name=easytier-cni -o wide
+```
+
+## 3. 创建辅助网络
+
+以[官方 NAD 示例](https://github.com/EasyTier/EasyTier/blob/main/easytier-contrib/easytier-cni/deploy/network-attachment-definition.yaml)为基础修改：
+
+```json
+{
+  "cniVersion": "1.0.0",
+  "name": "easytier",
+  "type": "easytier-cni",
+  "rpcPortal": "unix:///run/easytier-cni/rpc.sock",
+  "networkName": "kubernetes",
+  "networkSecretFile": "/etc/easytier-cni/network-secret",
+  "peers": ["tcp://192.0.2.10:11010"],
+  "mtu": 1380,
+  "timeoutSeconds": 30,
+  "ipam": {
+    "type": "whereabouts",
+    "range": "10.200.0.0/24",
+    "range_start": "10.200.0.10",
+    "range_end": "10.200.0.250"
+  }
+}
+```
+
+- `peers` 必须能通过 Pod 主网卡访问。建议使用 IP 地址，避免 CNI 阶段依赖集群 DNS。
+- EasyTier 地址段不能与节点、Pod、Service、局域网、VPN 或容器运行时网段重叠。
+- `mtu` 是 EasyTier packet MTU；TUN MTU 会扣除协议开销，例如 `1380` 对应 TUN MTU `1360`。
+
+完成修改后应用 NAD：
+
+```sh
+kubectl apply -f network-attachment-definition.yaml
+```
+
+## 4. 为 Pod 添加 EasyTier 网络
+
+在 Pod 上添加 Multus 注解：
+
+```yaml
+apiVersion: v1
+kind: Pod
+metadata:
+  name: easytier-client
+  annotations:
+    k8s.v1.cni.cncf.io/networks: easytier
+spec:
+  containers:
+    - name: client
+      image: busybox:1.37.0
+      command: ["/bin/sh", "-c", "sleep 3600"]
+```
+
+默认辅助网卡名为 `net1`。检查地址和 Multus 网络状态：
+
+```sh
+kubectl exec easytier-client -- ip address show net1
+kubectl get pod easytier-client \
+  -o jsonpath='{.metadata.annotations.k8s\.v1\.cni\.cncf\.io/network-status}'
+```
+
+两个 Pod 都连接到相同 EasyTier 网络后，可以直接通过各自的 `net1` IPv4 地址通信。
+
+## 运维注意事项
+
+- 删除 Pod 时，CNI 会删除对应 EasyTier 实例并释放 Whereabouts 地址。
+- 节点 daemon 会在 `/var/lib/easytier-cni/configs` 持久化 attachment；目录包含网络凭据，只允许 root 访问。
+- 更新 Secret 后，需要重启 `easytier-cni` DaemonSet，并重建已挂载 EasyTier 网络的 Pod。
+- 卸载后按需删除节点上的 `/etc/easytier-cni` 和 `/var/lib/easytier-cni`。
+
+完整配置、自动化 netns 测试和 Kind 三节点测试位于 [`easytier-contrib/easytier-cni`](https://github.com/EasyTier/EasyTier/tree/main/easytier-contrib/easytier-cni)。