* fix(lang): keep the {} value and the meaning in four translations
* test(lang): check that the fixed translations keep their key's {}
translate() replaces {} with the value from the call. The test checks that no non-empty ru, sc or vi translation of a key with {} drops it; on master it fails with "Downloading {}" => "Скачивание".
Turning on privacy mode 1 could fail with `os error 193`, "%1 is not a valid
Win32 application", naming a broker executable that is perfectly intact.
`CreateProcessAsUserW` was given a NULL `lpApplicationName` and the unquoted
broker path as `lpCommandLine`. With no application name Windows has to work
out the image from the command line, and it does so by trying each
whitespace-delimited prefix in turn. The default install path is
`C:\Program Files\RustDesk\...`, so the first candidate is `C:\Program`. On a
machine where a file by that name happens to exist, Windows loads it, fails to
read it as a PE image, and returns ERROR_BAD_EXE_FORMAT. The path in the error
message is the command line that was intended, not the file Windows tried.
Pass the path as `lpApplicationName`, which removes the guessing entirely, and
quote the copy that goes in as `lpCommandLine` so the child still sees a
well-formed `argv[0]`. Bind that buffer mutably while here: the API declares it
as an in/out `LPWSTR` the Unicode implementation may rewrite, so handing over a
const pointer cast to mutable was the wrong interface for the call.
Both other `CreateProcess` call sites in the tree already name the executable
explicitly, one of them with a comment giving this exact reason, so this brings
the third into line rather than introducing a pattern.
Refs #16705
Recent sessions and Favorites load only when `APP_DIR` is non-empty. That
precondition belongs to mobile alone: `Config::path` resolves through `APP_DIR`
on Android and iOS, so reading peers before it is set would look in the wrong
place there, but on desktop the peer path never consults it.
On Linux the Flutter side fills `APP_DIR` from
`getApplicationDocumentsDirectory()`, which shells out to `xdg-user-dir`. When
that executable is absent, as in a minimal Debian install or a container, the
call throws, the exception is only `debugPrint`ed, and `APP_DIR` stays empty.
All three loaders then skip their work, so both lists stay empty for good while
`~/.config/rustdesk/peers/*.toml` sit there unread and nothing in the log says
why. Windows and macOS carry the same trap, merely with a lookup that is far
less likely to fail.
Move the predicate into one helper that applies it only where the path actually
depends on it. Mobile keeps the existing check; everywhere else the peers load.
Refs #16622
* fix(linux): capture the default output's monitor for remote audio
With no audio input chosen, the _pa service recorded the first source whose name contains "monitor". Sources are listed in creation order, so on a host with more than one output, such as onboard audio plus HDMI, a USB headset or a Bluetooth speaker, that monitor can belong to an output the desktop does not play to, and the controlling side hears silence. Ask the server for the default sink and record its monitor, keeping the first monitor as the fallback.
* fix(linux): log the lookups that fall back to the first monitor
* fix(linux): fall back to the first monitor when the default sink has no monitor name
* fix(linux): throttle the default monitor lookup warnings
The web console is only reachable from the "More on web console" item
in the menu beside the Tags heading, which is easy to miss and hidden
when the tags panel is turned off.
Add a button to the Address Book toolbar that opens the same URL and
reuses the same tooltip text. It shows under the same conditions as the
menu item: logged in, not in legacy address book mode, and write access
to the current book.
Signed-off-by: Cody Swartz <ctsstc@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(client): sync FPS control and reset limits on quality changes
Track the last sent FPS across manual and automatic updates.
Reset the FPS limit to 30 when leaving custom image quality,
while preserving lower automatic limits when already capped at 30.
fix(client): reset last sent FPS state on reconnect
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(client): invalidate auto FPS state when updating FPS limits
Clear last_auto_fps when setting custom FPS so the controller recomputes
on its next tick. Restore the 30 FPS cap when switching to preset quality
while preserving the saved custom FPS setting.
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(client): reset auto FPS state after successful login
Move last_auto_fps invalidation from login send paths to
handle_peer_info, covering both normal and switch-side logins.
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(client): scope auto FPS state to each connection
Keep automatic FPS state in the connection loop and invalidate it when processing manual FPS updates or successful login.
Validate queued automatic updates against the current FPS cap and record the value only after a successful send.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* test(client): cover FPS adjustment after manual updates
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): recognize a login screen whose greeter uses another nologin path
is_prelogin() reads the active user's passwd entry and treats /bin/false or /usr/sbin/nologin as a greeter account. Greeter accounts on Arch use /usr/bin/nologin (gdm, sddm and lightdm) and others /sbin/nologin, so there a login screen was not detected: the audio service kept retrying the _pa ipc every second, which #16390 stopped at a login screen, and file transfer used the greeter's name. Match any nologin path.
* fix(linux): match nologin only in the shell field of the passwd entry
Checking the whole getent line also matched a home directory such as /home/nologin-test. Read the last field of each line and require it to end in /false or /nologin. Output with several lines, as getent prints for an empty name, still counts if any entry has such a shell, as before.
* fix(linux): compare the greeter shell with the known paths only
Match the shell field against /bin/false, /usr/bin/false, /usr/sbin/nologin, /sbin/nologin and /usr/bin/nologin instead of any path that ends in /false or /nologin, so a custom shell elsewhere is not taken for a login screen.
* fix(linux): keep listing resolutions after an interlaced xrandr mode
resolutions() reads the mode lines below an output with (\s*\d+x\d+\s+\d+.*\n)+, which needs whitespace right after the size. A TV usually lists 1920x1080i right after 1920x1080, so the list ended there and the resolution menu offered only the current mode. Allow a suffix after the size; the per-mode pattern still skips the interlaced lines, so only the following progressive modes are added.
* test(linux): check the resolutions parsed from xrandr output
Move the parsing of resolutions() into resolutions_from_xrandr(), which takes the xrandr output, so the test asserts the returned list instead of the captured mode lines. resolutions() runs xrandr and calls it; the parsing is unchanged.
* Revert "test(linux): check the resolutions parsed from xrandr output"
This reverts commit 854beb1. AGENTS.md asks not to reshape existing code only to enable a test, so resolutions() keeps its structure and the test checks the captured mode lines, as output_name_does_not_match_inside_another_name checks get_xrandr_conn_pat.
is_login_wayland() looks for WaylandEnable in /etc/gdm3/custom.conf and /etc/gdm/custom.conf. Debian's gdm3 package ships /etc/gdm3/daemon.conf instead (bookworm and trixie), whose default has '#WaylandEnable=false', so on Debian the function always returned false and the 'Login screen using Wayland is not supported' card never appeared. Read daemon.conf after the two custom.conf paths.
* fix(lang): pick Traditional Chinese for Hong Kong and Macao system locales
With no language chosen in Settings, resolve_lang picks zh-tw only when the system locale contains tw. Hong Kong and Macao locales (zh_HK, zh-Hant-HK, zh_HK_#Hant, zh_MO) and a bare zh-Hant got Simplified Chinese, although they write Traditional Chinese. Pick zh-tw for them too, unless the locale names the Hans script.
* test(lang): cover a bare zh-Hant locale
With no language chosen in Settings, resolve_lang takes the language from the system locale prefix. Kazakh locales are kk_* and Georgian locales are ka_*, but their translation tables are keyed kz and ge, so both fell through to English. Map kk to kz and ka to ge for the locale-derived language. A language saved in Settings is unchanged.
Configure the iOS audio session with the ambient category so remote
playback mixes with other apps while respecting Silent mode and lock.
Log configuration errors and leave audio activation to playback.
Signed-off-by: Rafal <mrsikorarafal@gmail.com>
Move the locked hwcodec revision from febec27 to ec38eba, the merge of
rustdesk-org/hwcodec#47: GPU query failure handling, Windows resource
handling and recoverable fragmented MP4 recording. hwcodec's own
dependencies are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(linux): no false "Sorry, try again." in gtk sudo after a PAM info line
The gtk sudo dialog takes the password before sudo starts and drops it
when sudo prints a non-prompt line first, such as pam_fprintd's "Place
your finger on the fingerprint reader". The real password prompt then
came up labelled as a retry, "Sorry, try again.", although no password
had been sent, so users took it as a rejected password.
Treat the next prompt as a first prompt when the typed password is
dropped. The dialog comes back prefilled and without the error.
Keeping the password and sending it to the next prompt instead is not
safe: when sudo authenticates without a prompt (fingerprint, NOPASSWD),
use_pty, the default since sudo 1.9.14, holds the tty in raw mode while
the command runs, so any output line ending in ':' would receive it.
Fixes#16647
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(linux): let gtk sudo retry after sudo-rs rejects a password
sudo-rs reports a rejected password with "sudo: Authentication failed,
try again." and then asks again. The line starts with "sudo:", so
ui_parent treated it as fatal: it showed it in an error dialog and
exited instead of offering a retry, as it does after classic sudo's
"Sorry, try again." (the second log in #16647).
Exempt exactly that line from the fatal check. It then goes through
the ordinary non-prompt branch, so the held-password drop rule still
applies. sudo-rs's final "maximum N incorrect authentication attempts"
stays fatal, and so does every other sudo:/su: line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: let custom client settings set websocket-port
A domain endpoint becomes ws(s)://<domain>/ws/id with no port, so a
WebSocket reverse proxy that cannot listen on 443 (or 80) is
unreachable. hbb_common adds websocket-port for that; list it in
KEYS_SETTINGS so default-settings and override-settings carry it.
The hbb_common bump also brings in 20d5019 (quiets smithay client
toolkit logs, rustdesk/hbb_common#620).
https://github.com/rustdesk/rustdesk-server-pro/discussions/1029
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update hbb_common for the websocket-port warning throttle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Update hbb_common: match websocket-port only against configured servers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pin hbb_common to the merged websocket-port change
rustdesk/hbb_common#626 is merged as edefa08. The range from master's
pin 5d52530 also includes 20d5019 (quiets smithay client toolkit logs,
rustdesk/hbb_common#620).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(windows): use native APIs for manual service control
rustdesk/rustdesk#16557
Replace elevated service-control batch scripts with SCM operations
and native tray shortcuts. Preserve SYSTEM configuration import
and propagate helper failures.
* fix(windows): preserve service state during manual control
Keep existing service registration and synchronize failed operations with SCM state. Run the installed legacy importer directly as SYSTEM, bound its exit waits, and keep auxiliary cleanup errors separate from service lifecycle results.
* fix(windows): preserve legacy service import without debug privilege
* fix(windows): replace installer certutil and findstr
Use native SHA-256 verification and shortcut decoding, and execute the protected batch script in a single cmd process. Preserve protected staging, verification receipts and failure exit codes.
Restore the master service-control flow and remove the separate SCM and Task Scheduler implementation to keep the antivirus fix focused and preserve legacy configuration import.
Validation: Windows Rust library build, nine focused tests, and isolated single-cmd success, failure, tamper rejection and cleanup checks passed. Bitdefender validation remains pending.
* fix(windows): preserve installer helper path compatibility
* fix(windows): preserve caret-only installer helper paths
* fix(windows): protect installer data and use native service control
Stage installer scripts, shortcuts and verified updates with restricted ACLs
before elevation. Remove the elevated portable-verifier launch while keeping
certutil and findstr out of the shared installer handoff.
Use the installed Flutter runner for native normal-service create/start and
stop/delete operations. Preserve existing registrations on repeated setup,
legacy configuration import, and compatibility with older installed runners.
Report installer failures and document the security and compatibility reasons.
Validation: Windows Rust test build and Release runner build passed; six
isolated service checks and runner exit-code checks passed. Focused Rust
installer/update tests passed 8/9; the directory-cleanup ACL test also fails in
the earlier binary. Final service lifecycle and Bitdefender testing is pending.
* fix(windows): clean staged installer files on UAC cancellation
Retain DELETE handles until the elevated cmd connects to a local pipe, then
release the handles before allowing the BAT to run. This preserves protected
staging while allowing cancellation cleanup and cmd file access.
Handle interrupted handoffs, supply the byte-count pointer required on
Windows 7, and explain early service dispatch in the C++ runner. Keep the
staging tests inline with their implementation.
Validation: Windows Rust test build, focused installer-file and handoff
tests, rustfmt, and staged diff checks passed. The pre-existing directory
ACL test failure is unchanged. Actual UAC cancellation, Windows 7 runtime,
and final-build Bitdefender validation remain pending.
* fix(windows): roll back new service registration on start failure
Delete a registration created by this attempt if startup fails, while preserving existing services and already-running success. Keep the original startup error and report rollback failures separately.
Validation: eight isolated service checks and the Release Flutter runner build passed. Real service startup failure and final-build Bitdefender validation remain pending.
* fix(windows): continue uninstall after service stop errors
Log an unsuccessful stop and still request deletion so the uninstall
script can reach its existing taskkill and cleanup commands. Treat an
already marked service as a satisfied deletion request, while preserving
other deletion errors and the normal stop wait.
Validation: all twelve isolated service-control checks passed, including
already-marked, stop-rejected, stop-timeout and deletion-denied cases.
The Release Flutter runner build and existing argument/exit-code checks
passed. Real SCM failure scenarios and Bitdefender remain unverified.
* fix(windows): finish installer setup before service startup
Complete SAS policy and printer setup before native service activation so a startup failure cannot skip independent installation steps. Preserve the startup error, rollback and legacy command sequences, and document uninstall_service's continuation result.
Validation: Windows Rust test compilation, four isolated command cases and two existing installer handoff tests passed. CodeRabbit completed with no findings. Actual installer, SCM and Bitdefender validation remains pending.
* fix(windows): use native service control for Sciter
Share the existing native service operations with Sciter and dispatch
--service-control before UI initialization. Keep Flutter's entry point and
the legacy commands for a different installed executable unchanged.
Validated the Windows x64 Sciter build, Flutter-feature test build,
x86 C++ bridge compilation, and real EXE/BAT error propagation. Final
Bitdefender installation and service lifecycle validation remain pending.
* fix(windows): propagate negative service-control exit codes
Treat every nonzero service-control exit status as a failure so crash and loader error codes cannot be reported as success. Verified six real cmd.exe exit-code cases; CodeRabbit review completed with no findings. Actual service crashes were not exercised.
* fix(windows): handle UAC cancellation and scope service rollback
Preserve the typed elevation error and its diagnostic details so canceled UAC prompts do not show an installation-failure dialog.
Use create-service for normal installation and create-service-with-rollback for manual Start Service. Retain a new registration after a normal installation startup error; roll back only the manual path that restores stop-service=Y.
Validation: Windows Rust test compilation, Release Flutter runner and Sciter builds, cancellation/error-chain checks, isolated service-result cases, and real executable argument/exit propagation checks passed. Actual UAC cancellation and Bitdefender were not rerun.
The controller sends a wheel tick as a MouseEvent whose type bits are
MOUSE_TYPE_WHEEL (src/common.rs) with the scroll delta in y, but
InputService only handles the legacy WHEEL_DOWN/WHEEL_UP masks
(523331/963) that current controllers never send. As a result the
mouse wheel does nothing on every Android controlled device.
Handle MOUSE_TYPE_WHEEL with the same stroke emulation the legacy
masks use, as a purely additive branch: a 90px vertical stroke
(MOUSE_WHEEL_STEP, three quarters of the legacy WHEEL_STEP - the full
120px felt too far per tick to reviewers on real devices) over
WHEEL_DURATION at the current cursor position, with the same top-edge
guard and queue consumption, mapped with the controller's sign
convention (y < 0 = wheel down; y == 0, a horizontal tick, is
ignored). The branch is gated to API 24+ like the rest of the gesture
path - below that, legacy devices take the Shizuku backend or a
no-op, not this class. The legacy WHEEL_DOWN/WHEEL_UP implementations
are untouched.
Community reports matching this gap on modern devices: #9321 (Pixel
8, Android 14) and #1466 (Android tablet).
Signed-off-by: CatzTimes <CatzTimes@users.noreply.github.com>
Co-authored-by: CatzTimes <CatzTimes@users.noreply.github.com>
The pattern resolutions() and current_resolution() build from the
output name is not anchored, so DP-1 also matches the eDP-1 line. On a
laptop where xrandr lists eDP-1 first, the external DP-1 reports the
built-in panel's current mode and mode list.
* Tune MediaCodec static refresh budgets
Use H.264 budgets 50/20/20/10 and H.265 budgets 90/20/20/20 from MT6855 1080p measurements with early stopping at 80% of observed-best improvement, not full convergence.
Retain the existing H.265 low-quality budget because the line-pattern sample did not confirm convergence within 150 repeat calls. Keep the existing ten latency-draining repeats, other backends, and refresh timing unchanged.
Extend output-budget and backend-selection regression coverage. Static refresh tests pass with hwcodec (17 tests) and default features (16 tests).
* fix(video): retain the largest static refresh budget per frame
* fix(ffmpeg): bound QSV encoder retries
Limit QSV frame submission to 100 retries and synchronization to 10
retries so persistent SDK warnings return an error to the caller. Retain
queued buffers when synchronization reaches its retry limit, and allow
later calls to retry without latching an error.
Wait 1 ms between retryable submission warnings on Windows: the original
av_usleep(500) becomes Sleep(0), exhausting the retry budget before even
a brief device-busy interval can end. Preserve non-Windows wait behavior
and the existing negative SDK result handling.
Validated against FFmpeg 7.1.1 on Intel UHD 730 with 42 fault/control
cases, synchronization-timeout recovery and close cleanup, real H.264
and HEVC encoding, and separate QSV hardware decoding. Four concurrent
1080p encoders completed 2400 frames without errors.
* fix(ffmpeg): handle undersized QSV HEVC buffers
Reserve at least three bytes per aligned pixel for HEVC output, following
Intel's documented workaround for underestimated bitstream capacity. Check
the size before assigning it to AVPacket's integer capacity.
Report negative synchronization results before reading output metadata or
draining the FIFO, keeping failed tasks owned until encoder close.
On Intel UHD 730, the existing code fails at input 242 with real desktop
captures; the patched code encodes and decodes all 1,200 inputs. Inputs and
PTS match, and the first 241 encoded frames are byte-identical. H.264 also
passes 300 frames, and restoring the small buffer verifies error handling.
* fix(ffmpeg): refresh QSV HEVC capacity after reset and shorten sync waits
* fix(ffmpeg): apply QSV buffer sizing to H.264
* fix: backport FFmpeg hybrid MP4 finalization fix
Backport FFmpeg commit 36896af64a9ecf6835758186e7161a2e954c364d so hybrid MP4 finalization writes the final moov before hiding the original fragmented index. Preserve recoverable fragments when the final index cannot be written.
* fix(file-transfer): keyboard navigation in the desktop file list
Up/Down never moved the selection in the desktop file transfer list. The
arrow keys fell through to directional focus traversal instead, which
moved focus out of the list and stopped type-to-search until the mouse
entered the list again.
Handle the navigation keys on the list, as the Sciter grid did:
- Up/Down move the selection one row; Shift extends or shrinks a range
from its anchor.
- PageUp/PageDown go to the edge of the visible rows first, then a page
further; Home/End go to the first/last row. Shift extends with each.
- Enter/numpad Enter opens the selected folder, like a double click.
- Left/Right are consumed so focus does not jump to the other pane.
Type-to-search now ignores control characters. On macOS and Linux Enter
carries "\r", which matched no name and cleared the selection before
Enter could open it.
Fixes#16635
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(file-transfer): keep default keys on focused file list children
The navigation bindings wrapped the whole file list, sort headers
included, so a header focused with Tab lost Enter to sort and the arrow
keys to move between headers: Enter ran the open-folder binding instead.
Handle the bindings only while the list itself has primary focus and let
keys on a focused child take their default path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(file-transfer): focus the file list when a row is clicked
The navigation keys only act while the file list holds primary focus.
Keyboard focus was handed to the list only when the mouse entered it,
so after Tab moved focus to a sort header, clicking a row left the
arrow keys inert until the mouse left and re-entered the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix: validate download destinations and peer filename rules
Reject unsafe or linked download destinations and validate empty-directory
paths before creating them. Bind overwrite approval to accepted transfer
entries and propagate receiver errors to the UI.
Validate remote listings using the peer's filename rules so Unix names
remain browsable on Windows. Reject locally unsafe basenames before
starting downloads from either the Flutter or legacy UI.
Finish the previous file before validating the next digest so rejecting
the next destination preserves the file already received.
Require confirmation before restarting interrupted downloads with stale
staging files. Preserve matching resumes and cover receiver recovery.
Retain explicit overwrite rejection for peers older than 1.1.10 that
cannot negotiate confirmation.
Signed-off-by: fufesou <linlong1266@gmail.com>
* comments
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: use async I/O for download preparation and resume
Use Tokio filesystem APIs for download setup and resume metadata checks. Run the Windows link-count query on the blocking pool and flush digest writes before returning.
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
* Update pt_PT.rs
* Add files via upload
* Update README-PTPT.md
* Update README-PTPT.md
* Update README.md to include new pt-PT (docs/README-PTPT.md)
* Update docs/README-PTPT.md
Corrected link libs/base
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
* Update docs/README-PTPT.md
Corrected "área de trabalho" to "área de transferência"
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
* Update pt_PT.rs
Fix api_server_connection_tip and api_server_empty_tip: translate from en.rs source
* Fix relative links in README-PTPT.md (remove extra docs/ prefix)
* Fix section anchors in README-PTPT.md to match PT-PT headings
* Fix typos and gender agreement in README-PTPT.md disclaimer
* Use European Portuguese terms in README-PTPT.md screenshot alt text
* Translate shortcut instructions from en.rs source
* Update pt_PT.rs
Align shortcut and API server strings with en.rs source (keep {} placeholders)
* Revert JumpLink to original value (out of scope for this PR
* Replace remaining Brazilian Portuguese terms in README-PTPT.md
Replaces leftover Brazilian Portuguese wording with European Portuguese
equivalents (e.g. "conosco" -> "connosco", "controle" -> "controlo",
"conexão" -> "ligação", "Você tem" -> "Tem", "amigável" -> "acessível",
"desktop" -> "ambiente de trabalho"), consistent with the terminology
already used in src/lang/pt_PT.rs.
---------
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
webpki-roots and webpki-root-certs 1.0.10 drop emSign ECC Root CA - G3, whose
eMudhra intermediates had their private keys compromised. rustls-webpki
0.103.16 rejects chains through those intermediates (RUSTSEC-2026-0382,
RUSTSEC-2026-0383); it needs rustls-pki-types >= 1.12.
Signed-off-by: Shaan Majid <70789625+shaanmajid@users.noreply.github.com>
* fix: warn about insecure custom API server connections
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: limit API server warning to HTTP addresses
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: resolve API warnings against effective server configuration
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: reuse common sync for API server previews
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: keep server settings usable on API preview errors
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
With the API server field empty, get_api_server_ builds the URL from the
ID server as "http://{host}:21114". For an ID server entered as a bare
IPv6 address such as 2001:db8::1, which test_if_valid_server accepts,
increase_port leaves it unchanged and the result is
http://2001:db8::1:21114. That does not parse as a URL (InvalidPort), so
login and every other API request fail.
Wrap the address in brackets in that branch only. Hostnames, IPv4 and
"[addr]:port" take the same path as before.
DisplayIter::next_screen built the monitor iterator from the
xcb_randr_get_monitors reply and freed the reply on the next line.
The iterator's data pointer points into that reply, so next() read
every monitor's name atom, position and size from freed memory, and
xcb_randr_monitor_info_next() walked it too.
Keep the reply with the iterator and free it when moving to the next
screen or when the DisplayIter is dropped.
* Forward audio latency environment to Linux user server
Preserve PULSE_LATENCY_MSEC and PIPEWIRE_LATENCY when the root service spawns the per-user RustDesk server.
The systemd service defines these variables, but they were not included in the explicit environment passed to run_as_user(), causing the user server and connection manager to fall back to higher audio latency.
Forward the existing values without changing their defaults.
* Add regression test for Linux audio latency forwarding
---------
Co-authored-by: chg <chg@vis-ag.ch>
* Add Flutter code section to README-ID
Added a section for Flutter code related to desktop and mobile platforms.
* Fix link formatting for Flutter code section
* fix(video): re-encode static frames for up to 10 seconds to improve clarity
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(video): limit static re-encoding to 300 frames instead of 10 seconds
Signed-off-by: 21pages <sunboeasy@gmail.com>
refactor(video): move static frame refresh into a dedicated module
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(video): preserve stuck-encoder detection state across static repeats
test(video): cover cached texture lifetime across capture restarts
fix(video): reduce static re-encoding limit to 100 frames
fix(qos): lower qos_trace logging to trace level
Signed-off-by: 21pages <sunboeasy@gmail.com>
fix(video): skip static frame re-encoding for AV1
perf(video): reuse VRAM encoder input for static refresh
Remove the DXGI repeat texture cache and use hwcodec's repeat entry point to avoid copying each captured frame. Isolate static refresh failures, pause after three errors, and resume after a real frame is sent successfully.
Cover cached input ownership, repeat failure recovery, refresh limits, and normal encoder failover with regression tests.
fix(vram): ignore cached SDK codec backends
chore(deps): temporarily use hwcodec re-encode branch
perf(video): wait 200ms before starting static refresh
chore(deps): update hwcodec for FFI exception handling
chore(deps): update hwcodec to 0.8.0
perf(video): start static refresh after 100ms
chore(deps): update hwcodec for exception-safe cleanup
chore(deps): update hwcodec for device-loss handling and noexcept FFI
chore(deps): update hwcodec to bbfc306
chore(qos): remove verbose diagnostics while retaining trace logs
* update hwcodec
Signed-off-by: 21pages <sunboeasy@gmail.com>
* refactor(scrap): keep repeat encoding in the vram module
* perf(vram): avoid intermediate frame vectors
- Drain normal and repeated encode output into protobuf messages.
- Cover null-texture encoding failures.
- Clarify the count-based static refresh budget.
- Update hwcodec to fix RAM decode buffers on resolution changes.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(scrap): preserve hardware encoder error codes
* test(video): remove uptime dependency from static refresh tests
* feat(video): configure static repeat limits by codec and quality
* fix(video): exempt VPx and AV1 from static repeat failure limit
* fix(video): count only successful static repeat frames
* fix(video): refine static repeat scheduling and VPx frame handling
Allow static refinement after a VP8/VP9 captured frame produces no output
without enabling it after a genuine encoding error. Carry this distinction
alongside the send result so the latest cached frame can still be sent when
capture becomes idle.
Keep VP8/VP9 repeats at a minimum of 100ms. Other codecs wait at least 100ms
initially, then follow the QoS frame interval aligned with the capture loop.
Use four quality bands, with VP8/VP9 limits of 30/20/20/0 and the tuned
H264/H265 limits. Include only production behavior and regression tests.
Validation: 16 static_refresh tests passed with hwcodec,vram,flutter enabled,
covering latest-frame recovery, genuine errors, timing, and repeat budgets.
* fix(video): tune static repeat limits by codec and backend
Use the measured obvious-improvement checkpoints for VP8/VP9 and separate
NVENC, QSV, and AMF H.264/HEVC limits for each quality tier. The checkpoints
recover 80% of the observed error improvement across the tested inputs.
Resolve the hardware backend from EncoderCfg during StaticRefresh
construction, including the VRAM adapter vendor. Keep the existing limits
for other hardware backends.
Validation: 19 static_refresh tests passed with hwcodec,vram,flutter.
The repeat measurements cover 192 series with no encode/decode errors.
* fix(video): refine static refresh budgets and cap repeat FPS
Add VideoToolbox HEVC budgets and tune quality bands from repeat-frame comparisons. Cap static refresh at 30 FPS and use the speed preset consistently at quality 0.5.
* remove unused variables
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(video): repair static refresh tests and throttle repeat logs
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
Both legs of race_transports_prefer_webrtc send their own punch request
to the same rendezvous server for the same peer, so a refusal there
(offline, unknown ID, key mismatch, a server-supplied other_failure)
fails both with the same text. Joining them as "WebRTC failed: X;
fallback failed: X" showed it twice and broke the UI's whole-string
matching: the offline auto-retry needs exactly "Remote desktop is
offline", the message box translates the text as one string, and
check_if_retry hides the retry button for any text containing "failed".
Return the error of the leg that failed last, as select_ok did before
the race existed, and log the other one once.
Claude-Session: https://claude.ai/code/session_01WS1HTjp6UQuG43KEcQPq1R
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(windows): move installer scripts into protected temp directories
Create a private directory under Windows Temp with its final DACL in
CreateDirectoryW. Grant Administrators and SYSTEM full access and use
OWNER RIGHTS to suppress the ordinary creator's implicit WRITE_DAC.
Keep the existing elevated system-cmd copy and SHA-256 verification flow.
Keep auxiliary files in the same directory, report cleanup failures, and
check command length before creating the directory.
This avoids PowerShell, helper executables, and application startup or DLL
linking changes. The Windows Temp parent must retain its standard protection
against deletion by unprivileged users. UAC cancellation can leave an empty
protected directory; the error reports its path.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(windows): preserve installer results when cleanup fails
Keep the original installer exit code and report remaining temporary directories or inspection errors as warnings with their paths. Include the directory path in creation errors.
Restore the existing handoff assertions in a separate test module, add a locked-directory regression for successful and failed installers, and remove the unrelated ERRORLEVEL environment change.
Validation: scoped formatting and whitespace checks passed. Native cmd probes reproduced the failure before the fix and preserved both exit codes afterwards. No project build or Rust test execution was performed.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(windows): clarify installer cleanup warnings
Describe protected directories as possibly remaining when cleanup cannot be verified. Remove the cleanup-only test added during review while retaining existing handoff coverage.
Signed-off-by: fufesou <linlong1266@gmail.com>
* test(windows): keep installer handoff tests inline
Restore the inline test module and original helper order to reduce the diff against master. Keep the directory cleanup assertions and original bootstrap checks.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(windows): include paths in installer directory check errors
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(windows): clear inherited ERRORLEVEL before installation
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(windows): avoid duplicate directory error messages
Signed-off-by: fufesou <linlong1266@gmail.com>
* test(windows): verify installer directory permissions
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
On Linux, GTK destroys the window on a close request unless prevent-close
is on. When the main window is the last active one, onActiveWindowChanged()
turns prevent-close off and calls close(), yet onWindowClose() still went
on to hide() the destroyed window, and the close event that close() emits
re-entered onWindowClose() to save the frame through isMaximized(). The cm
and install windows never turn prevent-close on, so their window is always
gone by the time onWindowClose() runs.
With window_manager before cf4aef05 those calls segfaulted in
gtk_window_is_maximized; since then they fail with an unhandled
PlatformException(window_destroyed). Return early in both places instead.
Other platforms and sub windows keep the old path.
Fixes#16512
Claude-Session: https://claude.ai/code/session_01WS1HTjp6UQuG43KEcQPq1R
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(fdroid): generate the bridge with the Flutter version bridge.yml uses
#15139 moved the bridge Flutter version from bridge.yml's env into its
job matrix, so build_fdroid.sh read `.env.FLUTTER_VERSION` as "null".
The F-Droid recipe worked around that by pinning it to 3.24.5, which
equals ANDROID_FLUTTER_VERSION, and the script only generated the bridge
when the two versions differed, so the build failed on the missing
src/bridge_generated.rs.
Read the version from the default bridge-artifact matrix entry (3.22.3),
and always generate the bridge: the build needs it whether or not the
two Flutter versions match.
Fixes#16549
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P1grQ39ByRWPUtTBdTzEBF
* fix(fdroid): keep the recipe's version sed from overriding the bridge Flutter
The F-Droid recipe works around the old "null" read with
`sed 's/${FLUTTER_BRIDGE_VERSION}/<version>/'`, and its auto-update
copies that line into every new version. The 1.5.0 recipe pinned 3.24.5
and then 3.47.7, but flutter_rust_bridge codegen only works with the
Flutter version bridge.yml uses (3.22.3). Pass the unbraced variable to
prepare_flutter so that sed no longer matches the call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P1grQ39ByRWPUtTBdTzEBF
* fix(fdroid): raise the Gradle heap for the AGP 8 build
#15603 moved the Android build to Gradle 8.11.1 / AGP 8.10.1 with
compileSdk 36 and desugaring. The first F-Droid 1.5.0 build got past the
bridge and the Rust library, then failed in assembleRelease with "Gradle
build daemon has been stopped: since the JVM garbage collector is
thrashing", because gradle.properties still caps the heap at 1 GiB. CI
has long raised it to 2g; do the same here. A recipe that already
rewrites the -Xmx1024M setting keeps its own value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P1grQ39ByRWPUtTBdTzEBF
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Maison da Silva